Digitrade HS128 Bedienungsanleitung PDF herunterladen (Seite 40)

English

Follow these steps to change the PIN of your Smart Card :

1) Insert the Smart Card into DIGITTRADE HIGH SECURITY HDD

(see page 37).

2) Press the “CHANGE PIN” button and afterwards the “1” button.

3) Conrm the entry with “ENTER”. The “STATUS” LED will ash four

times.

4) Enter the current 8-digit PIN and press “ENTER” to conrm the entry.

5) Enter the new 8-digit PIN and press again “ENTER” for conrmation .

6) Enter the new conrmed 8-digit PIN again and press “ENTER”.

After a successful PIN change, the Status -LED will ash four times and

you will hear two beeps. The DIGITTRADE HIGH SECURITY HDD will be

identied by the system as a removable medium and the lighting of the

keypad disappears.

The access is enabled and the Smart Card can be removed.

If the PIN change was not sucessful, the “ERROR” LED will ash. Press

the “ESC” button and start again with the rst step of the PIN change.

Changing the PIN

Note: The DIGITTRADE HIGH SECURITY HDD only accepts 8-digit PINs.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

Keine Kommentare

Digitrade HS128 Bedienungsanleitung Seite 40